Missouri S&T AESS UAV Team

We began construction of the new wing on Friday (January 25th) after all the ribs were waterjet. The new wing is build out of plywood and balsa and hardwood rib caps. So far it seems to be significantly stronger than our previous wing. Building a wing from scratch can be a rather tedious and time consuming process, in the last two days we have put in 20+ hours building the wing, and it’s now nearing completion. The control surfaces are the last major component left to build. Below are some pictures of the wing (for more pictures visit our flickr).

The left wing panel.

The complete three panel wing.

By having a three panel wing, transportation is greatly simplified.

I recently started assembling a test rig to integrate all of the electronics that will be going in the UAV. By performing all of this integration on test bench, the final installation and configuration will be performed much faster. This will also allow us do our HIL (Hardware In the Loop) simulation with all of the components connected.

You may have noticed that there are two large NiHM battery packs, these will soon be replaced by two (11.1V 3200mAh) Lithium Polymer battery packs, saving us about half a pound of weight and significantly increasing our power capacities. Although for bench testing all of the electronics will be powered of off a standard ATX computer power supply. The next step is the get the HIL simulation working with the autopilot and the it’s simulator, this part has been a bit finicky but it should be resolved now.

As a team we have also discussed possible strategies for image acquisition and processing. We had previously planned on simply acquiring VGA resolution video at 30 frames per second, but after reconsidering what altitudes we will be required to fly at to cover the search area in a reasonable time we quickly realized that VGA video would not provide the resolution we need to identify a human target on the ground from an altitude of 400 feet. We have since decided it would be best to use a much higher resolution still camera taking images at set intervals and tagging them with the GPS coordinates and the orientation of the UAV.